We are at JOE NALL until March 19th
All orders will be processed when we return. If you need to reach us, we will be monitoring our phone & email (
[email protected]
) as we're able.
Thanks - Andrew, Tim & Linda @ AJ Aircraft
0
Log in to my account
or
Create Account
home
Shopping Cart
0
Aircraft
AJ Slick 540
Raven
Laser Z200
Acuity
Laser 230z
Proteus Biplane
TA Horizons
Accessories
Gas Engines & Accessories
E-Motors & Accessories
Servos & Accessories
Propellers
Servo Arms
MPX & Servo Extensions
Spinners
Radio Equipment
Batteries
Quilted Wing & Stab Bags
Apparel
Adhesives
Aircraft Covering
Spare Parts
Acuity Spare Parts
AJ Slick 540 Spare Parts
ARS 300 Spare Parts
Laser z200 Spare Parts
Laser 230z Spare Parts
Proteus Biplane Parts
Raven Spare Parts
Clearance Items
Gift Certificates
About AJ Aircraft
Home
Accessories
Adhesives
FINISH_CURE 20 Minute finishing Epoxy 13 oz.
Zoom in on Image(s)
Add to Wish List
FINISH_CURE 20 Minute finishing Epoxy 13 oz.
0/5 rating
0
Review(s)
Write a Review
Your Price:
$44.99
Part Number:
BSI210
Availability:
In Stock
Put me on the Waiting List
Put me on the Waiting List
Quantity
+
-
Add to Cart
Submit
product tabs
Description
FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sanded the easiest of all our epoxies and is excellent for the sheeting of foam core wings. Allow 8 hours for full curing. For best results, FINISH-CURE™ should be heated to a temperature above 85 degrees F or applying light weight fiberglass, lay cloth on balsa first, then brush on FINISH-CURE™. When fully saturated, go over the surface with a heat gun, and then squeegee off excess epoxy with a playing card from an old deck. Heat and remove excess several times for a light weight finish. If room temperature is below 70 degrees F use a heat gun on the surface several times for the next 2 hours. When dry, lightly sand, then fill surface with a low weight spakeling compound, scrapping off excess with a playing card. Sand to a smooth finish ready for primer. For heavy weight fiberglass, apply the epoxy before and after laying down the cloth. FINISH-CURE™ is best mixed in a disposable cup.
×
