MKS HV777A+

HV777A+ Digital High-Torque Servo, with Titanium Gears, by MKS

• Dead Band: 0.0008ms (Default)
• Control System: +Pulse Width Control
• Working Frequency: 1520µs / 333hz
• (RX) Required Pulse: 3.5 ~8.4 Volt Peak to Peak Square Wave
• Operating Voltage: 6.0 ~7.4 V DC Volts
• Operating Temperature Range: -10 to + 60 Degree C
• Operating Speed (6V): 0.13 sec/60° degrees at no load
• Operating Speed (7.4V): 0.11 sec/60° degrees at no load
• Operating Speed (8.4V): 0.10 sec/60° degrees at no load
• Stall Torque (6V): 29.50 kg/cm - (409.7 oz/in)
• Stall Torque (7.4V): 36.5 kg/cm - (506 oz/in)
• Stall Torque (8.4V): 40.40 kg/cm - (561.1 oz/in)
• Motor Type: Coreless Motor
• Potentiometer Drive: Indirect Drive
• Driver Type: FET
• Bearing Type: Dual Ball Bearings
• Gear Type: Titanium Gears
• Connector Wire Length: 15.0 cm (5.9 in)
• Dimensions: 40X20X40 mm (1.57x0.97x1.57 in)
• Weight: 75.45g - (2.66 oz)