Hitec D-950TW

Your Price: $139.99

Hitec Digital Standard Servo

Part Number: HTC_D950TW

Availability: Out of Stock

Description

The titanium D-950TW is part of our D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.

Features

Programmable PWM Digital Amplifier
32-Bit MCU with 12-Bit ADC Circuitry
4096 Resolution
1M Cycle Long Life Potentiometer
Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
Dual Ball Bearing Supported Output Shaft
25-Tooth Output Spline
Coreless Metal Brush Motors
Nylon Reinforced Plastic Upper and Lower Case
Diamond Cut Aluminum Heat Sink Center Case
Dust Resistant and Splash Proof Case

Programmable Functions

End Point Adjustments
Direction
Fail Safe
Dead Band
Speed (Slower)
Soft Start Rate
Overload Protection
Data Save / Load
Program Reset

Performance Specifications
Operating Voltage Range (Volts DC)	4.8V ~ 6.0V ~ 7.4V
Speed (Second @ 60°)	0.23 ~ 0.17 ~ 0.14
Maximum Torque Range oz. / in.	292 ~ 403 ~ 486
Maximum Torque Range kg. / cm.	21.0 ~ 29.0 ~ 35.0
Current Draw at Idle	30 mA
No Load Operating Current Draw	500 mA
Stall Current Draw	6,200 mA
Dead Band Width	1 µs
Physical Specifications
Dimensions (Inches)	1.57 x 0.79 x 1.50
Dimensions (Metric)	40.0 x 20.0 x 38.0
Weight (Ounces)	2.4
Weight (Gram)	68.0
Circuit Type	32bit Programable Digital
Motor Type	Coreless Metal Brush
Gear Material	Titanium
Bearing Type	Dual Ball Bearing
Output Shaft (type / Ømm)	H25T
Case Material	Plastic / Aluminum
Dust / Water Resistance	Splash Proof
Connector Gauge (AWG) / Strand Count	20 / 80