|
|
|
|
 |
3 Review(s) |
5 |
|
|
51' AJ Slick 540
|
|
|
|
|
|
Description |
The 411: - Wing Span - 51"
- Length - 51"
- Height - 14"
- Wing Area - 540 sq.in.
- AUW (dry) - 4-4.5lb
- Electric Power - 850-1250 watt motor, 60 Amp ESC, 4S/5S/6S LiPo
- Radio - 5 channel with 4 high torque mini servos
Recommended CG Range and Control Throws - The center of gravity (CG) range for the 51" AJ Slick 540 is located 1/2" in front of the wing tube. (+/- 1/2")
- Aileron Control Throws
- Low Rates - 15 deg. (30% Exp)
- Mid Rates - 30 deg. (40% Exp)
- High Rates - 45 deg. (50% Exp)
- Elevator Control Throws
- Low Rates - 20 deg. (30% Exp)
- Mid Rates - 30 deg. (40% Exp)
- High Rates - 45 deg. (50% Exp)
- Rudder Control Throws
- Low Rates - 15 deg. (30% Exp)
- Mid Rates - 30 deg. (40% Exp)
- High Rates - Max Throw (50% Exp)
What's in the box:- NEW - Carbon-Kevlar plywood construction!
- NEW - Carbon-Kevlar reinforced landing gear mount!
- NEW - Carbon-Kevlar reinforced firewall!
- Carbon fiber main landing gear
- Carbon fiber tail gear
- Carbon fiber main wing tube
- Pre-hinged control surfaces ready to be glued
- G10 fiberglass control horns
- Ultralight foam wheels
- Heavy duty steel axles
- Quick install, pre-drilled wheel pants
- Pre-run rudder pull-pull wires (pushrod also included for push-pull option)
- High quality ball links & pushrods for all control surfaces
- Extra hardware bag for spares
- Velcro for battery restraint
- Optional SFGs included
- All airframe components covered in genuine Ultracote (White HANU870, True Red HANU866, Midnight Blue HANU885, Cub Yellow HANU884)
NOTE: This product is shipped in a single box measuring 44"L x 16"W x 8"H (10 lbs. total).
AJ flies this airframe with the following equipment:Also needed to complete: |
|
|
 |
|
|
excellent quality and a great flying little plane. Flies very precise and does great at 3d. Would not hesitate to buy another one. A winner for sure!! |
|
Reviewed by: (Verified Buyer) Rayford Lovell from Jacksonville.
- 11/29/2020
|
5/5
|
 |
|
excellent construction. Flew mine with EFlite Power 32 with lots of punch. Excellent landing gear mount! NO rudder coupling. Only drawback is poor visual contrast for the bottomside vs topside. May need to change bottom covering to black and white blocks as in the Acuity. |
|
Reviewed by: (Verified Buyer) David Tsen from Fargo, ND.
- 10/9/2020
|
5/5
|
 |
|
Very well built airframe. Fit and finish is very nice. Havent flown it yet but if it flys half as good as it looks will be awesome. |
|
Reviewed by: (Verified Buyer) BRIAN HILEMAN from Andrew's tx.
- 7/4/2020
|
5/5
|
 |
|
 |
|
 |
|
 |